Speaker Assemblies
BSD-5/7 Backseat Driver (BSD-5/7)
BSD-5/7 Backseat Driver for 1955-57 Chevrolet
Add some bottom end power to your system with the BACKSEAT DRIVER from Custom Autosound. The BACKSEAT DRIVER comes equipped with two Custom Autosound 8” subwoofers and the Boss 800 watt amp. It mounts to the back of the rear seat from the trunk. All cables and wires needed are included for a quick, easy installation.
Add some bottom end power to your system with the BACKSEAT DRIVER from Custom Autosound. The BACKSEAT DRIVER comes equipped with two Custom Autosound 8” subwoofers and the Boss 800 watt amp. It mounts to the back of the rear seat from the trunk. All cables and wires needed are included for a quick, easy installation.
BSD-5/7 Backseat Driver for 1955-57 Chevrolet
BSD-CAM-68/0 Backseat Driver (BSD-CAM-68/0)
BSD-CAM-68/0 Backseat Driver for 1967-70 Camaro
Add some bottom end power to your system with the BACKSEAT DRIVER from Custom Autosound. The BACKSEAT DRIVER comes equipped with two Custom Autosound 8” subwoofers and the Boss 800 watt amp. It mounts to the back of the rear seat from the trunk. All cables and wires needed are included for a quick, easy installation.
Add some bottom end power to your system with the BACKSEAT DRIVER from Custom Autosound. The BACKSEAT DRIVER comes equipped with two Custom Autosound 8” subwoofers and the Boss 800 watt amp. It mounts to the back of the rear seat from the trunk. All cables and wires needed are included for a quick, easy installation.
BSD-CAM-68/0 Backseat Driver for 1967-70 Camaro
BSD-CHL-68/2 Backseat Driver (BSD-CHL-68/2)
BSD-CHL-68/2 Backseat Driver for 1968-72 Chevelle
Add some bottom end power to your system with the BACKSEAT DRIVER from Custom Autosound. The BACKSEAT DRIVER comes equipped with two Custom Autosound 8” subwoofers and the Boss 800 watt amp. It mounts to the back of the rear seat from the trunk. All cables and wires needed are included for a quick, easy installation.
Add some bottom end power to your system with the BACKSEAT DRIVER from Custom Autosound. The BACKSEAT DRIVER comes equipped with two Custom Autosound 8” subwoofers and the Boss 800 watt amp. It mounts to the back of the rear seat from the trunk. All cables and wires needed are included for a quick, easy installation.
BSD-CHL-68/2 Backseat Driver for 1968-72 Chevelle
BSD-MS-65/9 Backseat Driver (BSD-MS-65/9)
BSD-MS-65/9 Backseat Driver for 1964-69 Mustang
Add some bottom end power to your system with the BACKSEAT DRIVER from Custom Autosound. The BACKSEAT DRIVER comes equipped with two Custom Autosound 8” subwoofers and the Boss 800 watt amp. It mounts to the back of the rear seat from the trunk. All cables and wires needed are included for a quick, easy installation.
Add some bottom end power to your system with the BACKSEAT DRIVER from Custom Autosound. The BACKSEAT DRIVER comes equipped with two Custom Autosound 8” subwoofers and the Boss 800 watt amp. It mounts to the back of the rear seat from the trunk. All cables and wires needed are included for a quick, easy installation.
BSD-MS-65/9 Backseat Driver for 1964-69 Mustang
BSDIMP-64 Backseat Driver (BSDIMP-64)
BSDIMP-64 Backseat Driver for 1964 Impala
Add some bottom end power to your system with the BACKSEAT DRIVER from Custom Autosound. The BACKSEAT DRIVER comes equipped with two Custom Autosound 8” subwoofers and the Boss 800 watt amp. It mounts to the back of the rear seat from the trunk. All cables and wires needed are included for a quick, easy installation.
Add some bottom end power to your system with the BACKSEAT DRIVER from Custom Autosound. The BACKSEAT DRIVER comes equipped with two Custom Autosound 8” subwoofers and the Boss 800 watt amp. It mounts to the back of the rear seat from the trunk. All cables and wires needed are included for a quick, easy installation.
BSDIMP-64 Backseat Driver for 1964 Impala
SATB69P T-Bird Panel (SATB69P)
SATB69P T-Bird Panel
Rear panel speaker assembly for T-birds years 1955-1957. Covered with black carpet with two 6” x 9” CAM 200 watt speakers installed. Wiring harness included.
Rear panel speaker assembly for T-birds years 1955-1957. Covered with black carpet with two 6” x 9” CAM 200 watt speakers installed. Wiring harness included.
SATB69P T-Bird Panel
Soundbar-CV Soundbar Speaker Assembly (Soundbar-CV)
Soundbar-CV Soundbar Speaker Assembly For 1963-82 Corvette
A great sound solution for Corvettes, years ’63-‘82. Designed to fit the rear horizontal panel. Only 3” deep divided into two sections with six speakers, two 4” speakers, two mid-range and two tweeters. 200 watts power handling! Not available for convertibles
A great sound solution for Corvettes, years ’63-‘82. Designed to fit the rear horizontal panel. Only 3” deep divided into two sections with six speakers, two 4” speakers, two mid-range and two tweeters. 200 watts power handling! Not available for convertibles
Soundbar-CV Soundbar Speaker Assembly For 1963-82 Corvette
SYSTEM-1 The System CURRENTLY UNAVAILABLE -- contact us for details (SYSTEM-1)
SYSTEM-1 The System -- 250 watt amplified satellite speaker system with subwoofer and two remote-mounted speakers
“The System” solves the age old problem of where to put speakers in classics, customs and street rods. “The System” allows you to keep the integrity of your vehicle intact yet enjoy quality sound like many of us have in our new cars. Satellite speakers look like AC vents and can be mounted under the dash, on the kickpanels, package tray, or possibly out of sight. The woofer is optimally mounted under the seat but can be mounted in the trunk if space requires it.
The System contains a Flat active aluminum subwoofer enclosure with 8” woofer plus 2-channel amplifier. Two 3” mid-tweeter satellite speakers in die cast metal housings. RCA or speaker level input (2 channel). Built in adjustments include separate gain control for 2 channel amp and subwoofer, high pass filter for satellites, subsonic filter bass boost and low pass filter for the subwoofer. Has auto power on if using speaker level inputs. Amplifier installation kit included.
Amplifier power: 150 watt subwoofer / 2x50 watt mid / tweeter.
“The System” solves the age old problem of where to put speakers in classics, customs and street rods. “The System” allows you to keep the integrity of your vehicle intact yet enjoy quality sound like many of us have in our new cars. Satellite speakers look like AC vents and can be mounted under the dash, on the kickpanels, package tray, or possibly out of sight. The woofer is optimally mounted under the seat but can be mounted in the trunk if space requires it.
The System contains a Flat active aluminum subwoofer enclosure with 8” woofer plus 2-channel amplifier. Two 3” mid-tweeter satellite speakers in die cast metal housings. RCA or speaker level input (2 channel). Built in adjustments include separate gain control for 2 channel amp and subwoofer, high pass filter for satellites, subsonic filter bass boost and low pass filter for the subwoofer. Has auto power on if using speaker level inputs. Amplifier installation kit included.
Amplifier power: 150 watt subwoofer / 2x50 watt mid / tweeter.
SYSTEM-1 The System -- 250 watt amplified satellite speaker system with subwoofer and two remote-mounted speakers
Undercover 1 Speaker Enclosure pair (Undercover 1)
Undercover 1 Speaker Enclosure pair with 5 1/2" woofers and Piezo Tweeters
Custom Autosound Undercover I speaker enclosures are designed for under-seat or horizontal wall installations. The Undercover I is the speaker solution providing solid sound where space is an issue or where altering the integrity of your classic vehicle is not an option. The Undercover I is a compact unit with one 5 1/2" 120 watt woofer and a piezo tweeter in each enclosure. This unit fits under the seat of most pre 1978 cars and trucks. Rated at 120 watts. Each enclosure measures 3" H x 8" W x 11" D. Sold in pairs only
Custom Autosound Undercover I speaker enclosures are designed for under-seat or horizontal wall installations. The Undercover I is the speaker solution providing solid sound where space is an issue or where altering the integrity of your classic vehicle is not an option. The Undercover I is a compact unit with one 5 1/2" 120 watt woofer and a piezo tweeter in each enclosure. This unit fits under the seat of most pre 1978 cars and trucks. Rated at 120 watts. Each enclosure measures 3" H x 8" W x 11" D. Sold in pairs only
Undercover 1 Speaker Enclosure pair with 5 1/2" woofers and Piezo Tweeters
Undercover 2 Speaker Enclosures (Undercover 2)
Undercover 2 Speaker Enclosures with 8" woofers and 2/ea Piezo Tweeters
The Undercover II gives you a little more from your hidden speaker system. Custom Autosound has developed the Undercover II with an 8" woofer and 2 Piezo tweeters in each unit. The Undercover II can be mounted anywhere it will fit, on walls or under seats. These units are a great addition to your Custom Autosound radio adding 200 watts of sound each. Each unit measures 3" H x 11" W x 12 1/2" D. Sold in pairs only.
The Undercover II gives you a little more from your hidden speaker system. Custom Autosound has developed the Undercover II with an 8" woofer and 2 Piezo tweeters in each unit. The Undercover II can be mounted anywhere it will fit, on walls or under seats. These units are a great addition to your Custom Autosound radio adding 200 watts of sound each. Each unit measures 3" H x 11" W x 12 1/2" D. Sold in pairs only.
Undercover 2 Speaker Enclosures with 8" woofers and 2/ea Piezo Tweeters
VW PANEL Speaker Panel for Volkswagen Beetle (VW PANEL)
VW PANEL Speaker Panel for Volkswagen Beetle
Our VW-PANEL Speaker panel fits perfectly in the rear deck or your 1957-1977 Volkswagen Beetle. It comes with two 6x9 200W speakers installed.
Our VW-PANEL Speaker panel fits perfectly in the rear deck or your 1957-1977 Volkswagen Beetle. It comes with two 6x9 200W speakers installed.
VW PANEL Speaker Panel for Volkswagen Beetle
- 1