Dual Voice Coil Speakers
DVC-4001 4x10 Speaker with Mounting Bracket, designed to fit several Chevrolet, Pontiac models.
DVC-4007 5x7 Speaker with mounting bracket, designed to fit certain Chevrolet, Pontiac models
DVC-4013 5x7 speaker with mounting bracket. Fits certain 1950's Buicks, Olds, Packards Chevy/GMC trucks.
DVC-3001 4x10 Speaker (DVC-3001)
DVC-3001 4x10 Standard Replacement Dual Voice Coil Speaker.
Will this speaker fit your car? Check our Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
Will this speaker fit your car? Check our Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
DVC-3001 4x10 Standard Replacement Dual Voice Coil Speaker.
DVC-3006 6x9 Speaker (DVC-3006)
DVC-3006 6x9 Standard Replacement Dual Voice Coil Speaker.
Will this speaker fit your car? Check our Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
Will this speaker fit your car? Check our Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
DVC-3006 6x9 Standard Replacement Dual Voice Coil Speaker
DVC-3008 5x7 Dual Voice Coil Speaker (DVC-3008)
DVC-3008 5x7 Dual Voice Coil Speaker
Will this speaker fit your car? Check our Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
NOTE: File photo. Actual product may vary in appearance.
Will this speaker fit your car? Check our Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
NOTE: File photo. Actual product may vary in appearance.
DVC-3008 5x7 Dual Voice Coil Speaker
DVC-3010 5x7 Speaker (DVC-3010)
DVC-3010 5x7 Speaker.
Designed to fit certain Buicks, Corvettes. See Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
Designed to fit certain Buicks, Corvettes. See Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
DVC-3010 5x7 Speaker. Designed to fit certain Buicks, Corvettes.
DVC-3015 5x7 Speaker (DVC-3015)
DVC-3015 5x7 Standard Replacement Dual Voice Coil Speaker.
Also: Replaces the 6" round speakers mounted between the rear seats of many GM vehicles.
Will this speaker fit your car? Check our Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
Also: Replaces the 6" round speakers mounted between the rear seats of many GM vehicles.
Will this speaker fit your car? Check our Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
DVC-3015 5x7 Standard Replacement Dual Voice Coil Speaker.
DVC-31005 5" round speaker (DVC-31005)
DVC-31005 5" round speaker
Designed to fit certain Volkswagen models. See Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
Designed to fit certain Volkswagen models. See Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
DVC-31005 5" round speaker designed to fit certain Volkswagen models.
DVC-4001 4x10 Speaker with Mounting Bracket (DVC-4001)
DVC-4001 4x10 Speaker with Mounting Bracket
Designed to fit several Chevrolet, Pontiac models. See Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
Designed to fit several Chevrolet, Pontiac models. See Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
DVC-4001 4x10 Speaker with Mounting Bracket, designed to fit several Chevrolet, Pontiac models.
DVC-4002 4x10 Speaker with Mounting Bracket. (DVC-4002)
DVC-4002 4x10 Speaker with Mounting Bracket.
Fits certain Chevrolet models. See Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
Fits certain Chevrolet models. See Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
DVC-4002 4x10 Speaker with Mounting Bracket. Fits certain Chevrolet models.
DVC-4004 4x10 Speaker with mounting Bracket (DVC-4004)
DVC-4004 4x10 Speaker with mounting Bracket.
Fits certain Mustang models See Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
Fits certain Mustang models See Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
DVC-4004 4x10 Speaker with mounting Bracket. Fits certain Mustang models
DVC-4005 4x10 Speaker with Mounting Bracket (DVC-4005)
DVC-4005 4x10 Speaker with Mounting Bracket.
Fits certain Chevrolet/GMC trucks. See Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
Fits certain Chevrolet/GMC trucks. See Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
DVC-4005 4x10 Speaker with Mounting Bracket. Fits certain Chevrolet/GMC trucks.
DVC-4005-A 4x10 Speaker with Mounting Bracket. (DVC-4005-A)
DVC-4005-A 4x10 Speaker with Mounting Bracket.
Fits certain Chevrolet/GMC trucks. See Application Chart.
NOTE: Actual product may vary from photo.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
Fits certain Chevrolet/GMC trucks. See Application Chart.
NOTE: Actual product may vary from photo.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
DVC-4005-A 4x10 Speaker with Mounting Bracket. Fits certain Chevrolet/GMC trucks.
DVC-4007 5x7 Speaker with mounting bracket (DVC-4007)
DVC-4007 5x7 Speaker with mounting bracket
Designed to fit certain Chevrolet, Pontiac models. See Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
Designed to fit certain Chevrolet, Pontiac models. See Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
DVC-4007 5x7 Speaker with mounting bracket, designed to fit certain Chevrolet, Pontiac models
DVC-4008 4x10 Speaker with Mounting Bracket (DVC-4008)
DVC-4008 4x10 Speaker with Mounting Bracket
Fits certain Chevrolet models. See Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
Fits certain Chevrolet models. See Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
DVC-4008 4x10 Speaker with Mounting Bracket, fits certain Chevrolet models
DVC-4009 5x7 Speaker with Mounting Bracket. (DVC-4009)
DVC-4009 5x7 Speaker with Mounting Bracket.
Fits certain Chevrolet models. See Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
Fits certain Chevrolet models. See Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
DVC-4009 5x7 Speaker with Mounting Bracket. Fits certain Chevrolet models.
DVC-4010 4x10 Speaker with mounting bracket (DVC-4010)
DVC-4010 4x10 Speaker with mounting bracket
Designed to fit certain Buick Skylarks. See Application Chart.
NOTE: Actual product may vary from photo
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
Designed to fit certain Buick Skylarks. See Application Chart.
NOTE: Actual product may vary from photo
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
DVC-4010 4x10 Speaker with mounting bracket, designed to fit certain Buick Skylarks.
DVC-4012 6x9 Speaker with Mounting Bracket (DVC-4012)
DVC-4012 6x9 Speaker with Mounting Bracket
Fits certain Ford, Thunderbird models. See Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
Fits certain Ford, Thunderbird models. See Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
DVC-4012 6x9 Speaker with Mounting Bracket. Fits certain Ford, Thunderbird models
DVC-4012-T 6x9 Speaker with Mounting Bracket (DVC-4012-T)
DVC-4012-T 6x9 Speaker with Mounting Bracket
Fits certain Chevrolet/GMC trucks. See Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
Fits certain Chevrolet/GMC trucks. See Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
DVC-4012-T 6x9 Speaker with Mounting Bracket. Fits certain Chevrolet/GMC trucks.
DVC-4013 5x7 speaker with mounting bracket (DVC-4013)
DVC-4013 5x7 speaker with mounting bracket
Fits certain 1950's Buicks, Olds, Packards Chevy/GMC trucks. See Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
Fits certain 1950's Buicks, Olds, Packards Chevy/GMC trucks. See Application Chart.
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
DVC-4013 5x7 speaker with mounting bracket. Fits certain 1950's Buicks, Olds, Packards Chevy/GMC trucks.
DVC-4013-M 6x9 Speaker with Mounting Bracket (DVC-4013-M)
DVC-4013-M 6x9 Speaker with Mounting Bracket
Fits certain Chevrolet models. See Application Chart.
NOTE: Actual product may vary from photo
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
Fits certain Chevrolet models. See Application Chart.
NOTE: Actual product may vary from photo
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
DVC-4013-M 6x9 Speaker with Mounting Bracket. Fits certain Chevrolet models.
DVC-4014 4x10 Speaker with Mounting Bracket (DVC-4014)
DVC-4014 4x10 Speaker with Mounting Bracket
Fits certain Olds/Pontiac models. See Application Chart.
NOTE: Actual product may vary from photo
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
Fits certain Olds/Pontiac models. See Application Chart.
NOTE: Actual product may vary from photo
Custom Autosound's dual voice coil (DVC) speakers are designed to give you exceptional sound quality from your classic car or truck's original mono speaker location. These speakers provide up to 70% more cone surface area than conventional dual speakers. This gives you improved bass response and 140 Watt power handling. Both of your radio's stereo channels will connect directly to one of our DVC speakers.
Installation tip: most car stereos offer outputs for four speakers. If only using two, use two DVC speakers; connect both left channels to one speaker and both right channels to the other. This provides you with full stereo effect AND the full power of the stereo! Use your balance control to adjust between them, even if used in the front/rear locations.
DVC-4014 4x10 Speaker with Mounting Bracket. Fits certain Olds/Pontiac models.